|
BELT TYPE/MATERIAL/CHARACTERISTICS
|
|
EDGES |
|
JOINTS / SEAMS |
|
RIGID
Kevlar® (Aramid) and Teflon® (PTFE) Coated Fiberglass
|
TAMIP KGT 40
Smooth and stable for high amounts of tension, 4x4 mm mesh
Max Working Temp: 190º C / 370º F
Air Flow/CFM: 1710
Abrasion Resistance: None
|
|
FLEXIBLE BELTS
- Coated edge with Polyurethane resin
- Double Reinforced edge, polyurethane resin coating, sewn woven fabric
RIGID BELTS
- Sewn edge, Teflon® coated fiberglass
- Hi-Flex edge, 100% Teflon®
- Sewn edge, Woven Nomex® fabric
|
|
FLEXIBLE BELTS
- ROTOCLIP joint with fold, made from the belt with an inserted PEEK spiral.
- ROLCLIP joint with smooth surface, no fold, for sensitive fabrics; made from the belt with an inserted PEEK spiral.
RIGID BELTS
- Kevlar® Sandwich joint with PEEK spiral
- Bullnose 100% Kevlar®Joint
- Aligator Metal Joint
|
|
RIGID
Teflon® (PTFE) Coated Fiberglass
|
TAMIP GT 40
Standard smooth quality, 4x4 mm mesh
Max Working Temp: 260º C (500º F)
Air Flow/CFM: 1900
Abrasion Resistance: none
|
|
| |
TAMIP GT 40 DW
Smooth quality 4x4 mm mesh reinforced by a double weft
Max Working Temp: 260º C (500º F)
Air Flow/CFM: 1700
Abrasion Resistance: None
|
|
|
|
|
| |
TAMIP GT 20
Standard smooth quality with reinforced construction, 2x2 mm mesh
Max Working Temp: 260º C (500º F)
Air Flow/CFM: 1150
Abrasion Resistance: None
|
|
|
|
|
|
FLEXIBLE
100% Polyester
|
TAMIP C 928
Resistant quality
Max Working Temp: 150º C (300º F)
Air Flow/CFM: 1400
Abrasion Resistance: Strong
|
|
|
|
|
| |
TAMIP CA 928
Non marking needlepunched fiber surface
Max Working Temp: 150º C (300º F)
Air Flow/CFM: 280
Abrasion Resistance: None
|
|
|
|
|
| |
TAMIP C 498
Reinforced double layer belt for wide width shrinkage fabrics
Max Working Temp: 150º C (300º F)
Air Flow/CFM: 1300
Abrasion Resistance: Strong
|
|
|
|
|
| |
TAMIP Multiclip 80
Reinforced spiral belt, stable
Max Working Temp: 150º C (300º F)
Air Flow/CFM: 1100
Abrasion Resistance: Strong
|
|
|
|
|
| |
TAMIP C 4/4
Flat, strong and open conveyor belt
Max Working Temp: 150º C (300º F)
Air Flow/CFM: 1250
Abrasion Resistance: Strong
|
|
|
|
|
|
FLEXIBLE
Ryton® (PPS) and Nomex® (Aramid)
|
TAMIP C 928 R
Sturdy enough for gas or heated oil dryers
Max Working Temp: 180º C (350º F)
Air Flow/CFM: 1570
Abrasion Resistance: Strong
|
|
|
|
|
| |
TAMPI CA 928 R
Non marking needlepunched fiber surface
Max Working Temp: 180º C (350º F)
Air Flow/CFM: 450
Abrasion Resistance: None
|
|
|
|
|
| |
TAMIP C 928 RR
Sturdy enough for gas or heated oil dryers.
Max Working Temp: 200º C (390º F)
Air Flow/CFM: 1500
Abrasion Resistance: Strong
|
|
|
|
|
| |
TAMIP HT 500 NR
Suitable for pigment printing for good resistance at the joint and stability across the belt width.
Max Working Temp: 200º C (390º F)
Air Flow/CFM: 1200
Abrasion Resistance: Medium
|
|
|
|
|
|
FLEXIBLE
100% Nomex®
|
TAMIP HT 500 N
Resistant quality.
Max Working Temp: 230º C (450º F)
Air Flow/CFM: 920
Abrasion Resistance: Medium
|
|
|
|
|
| |
TAMIP HT 541 N
Smooth surface for sensitive print fabrics like silk, etc.
Max Working Temp: 230º C (450º F)
Air Flow/CFM: 615
Abrasion Resistance: Medium
|
|
|
|
|
|
FLEXIBLE
PEEK and Nomex®
|
TAMIP C 928 ZN
Reinforced strength for pigment printing.
Max Working Temp: 230º C (450º F)
Air Flow/CFM: 1200
Abrasion Resistance: Very Strong
|
|
|
|
|
| |
TAMIP C 944 ZN
Reinforced tight mesh for pigment printing.
Max Working Temp: 230º C (450º F)
Air Flow/CFM: 1000
Abrasion Resistance: Very Strong
|
|
|
|
|