X
GO

Industries

 
Textile Weaving
Kloecker Leno Devices & Creels

Overview


Choose from the following accessories, as well as spare and replacement parts, for Gebr. Klöcker GmbH Leno Systems.

  1. Reed hooks and threading aids
    • Threading aids used to draw or thread up Klöcker K-MAG® Selvedge Motion devices in 4 end and 8 end versions.
    • Reed Hook used to draw in or thread up end from warp to reed.
  2. 8 End Eyelet Plate
    • ​​​​​​150mm X 30mm - used to direct ends from creel through the dropwires. Usually installed at base of a Klöcker Creel Stand, or on the loom. Also available in 18 end version (345mm X 30mm).
  3. 16 End Thread Reversion with 20mm Clamp
    • Thread reversion for 16 ends to direct leno and catch cord ends through the dropwires.
    • Available in right and left hand versions
    • Height adjustable
  4. Clamping available for dropwire support bars of:
    • 20/50mm
    • 15mm
    • 38mm Hex
    • Jaw type
  5. 4-End Thread Reversion with 20mm Clamp
    • 20 mm
    • 20/50mm
    • 15mm
    • 38mm Hex
    • Jaw type
  6. 4-End Thread Reversion with 38mm Clamp
    • Thread reversion for 4 ends to direct leno ends through dropwires
    • Can be adjusted on loom to be right or left hand
    • Clamping available for dropwire support bars of:
    • used mainly on 38mm hexagon bar of SULZER Projectile Looms. Normally used to attach hold-down.
    • Jaw Type Clamp
    • Used to attach hold-down or thread reversion when 20mm, 15mm, 20/50mm, or 38mm Hex clamps not available.
    • Clamp to attach to drop wire bars
  7. Flexible Hold Downs

    • Available for 2 ends through 8 ends

    • Used with heddle lenos

    • Provides constant tension to leno ends

    • Increases life of heddle lenos

    • Available with clamps to fit the following support bars:
      • 20mm
      • 20/50mm
      • 15mm
      • 38mm Hex
      • Jaw type
  8. Hold Down with quick thread ceramic guides

    • 210mm or 100mm bar available

    • Used with heddle lenos

    • Available for 2 ends through 8 ends

    • Available with clamps to fit the following support bars:

      • 20mm

      • 20/50mm

      • 15mm

      • 38mm Hex

      • Jaw type

  9. Pigtail type hold down

    • 210mm bar

    • Quick thread pigtail guide

    • Height adjustment secured at two points

    • Available with clamps to fit the following support bars:

      • 20mm

      • 20/50mm

      • 15mm

      • 38mm Hex

      • Jaw type


Specifications


Features


Product Uses, Tasks & Application

Manufacturer Information