X
GO

Industries

 
Textile Finishing
Belts/Felts

Dollfus & Muller - Relax Dryer Belts

Mesh conveyor belts for relax dryers, ovens.


Inquire About This Product Save PDF
View More Dollfus and Muller Products

Overview


Dollfus Muller print dryer belts can be used on the following textile printing machines: Zimmer, SPG Prints, Efi Reggiani, Buser, Harish, Ichinose, Kuil, Laxmi, Aztec, Hocen, Austromaquinas, Stovec, Meccanotessile, etc.

Available belt styles, edges and joints are summerized below.  Detailed line drawings and pictures are available in the Dollfus and Muller "Printed Felts and Belts" catalog in the "Media" section below.

 

 

BELT TYPE/MATERIAL/CHARACTERISTICS

  EDGES   JOINTS / SEAMS

RIGID

Kevlar® (Aramid) and Teflon® (PTFE) Coated Fiberglass

TAMIP KGT 40

Smooth and stable for high amounts of tension, 4x4 mm mesh

Max Working Temp: 190º C / 370º F

Air Flow/CFM: 1710

Abrasion Resistance: None

 

FLEXIBLE BELTS

  • Coated edge with Polyurethane resin
  • Double Reinforced edge, polyurethane resin coating, sewn woven fabric

RIGID BELTS

  • Sewn edge, Teflon® coated fiberglass
  • Hi-Flex edge, 100% Teflon®
  • Sewn edge, Woven Nomex® fabric
 

FLEXIBLE BELTS

  • ROTOCLIP joint with fold, made from the belt with an inserted PEEK spiral.
  • ROLCLIP joint with smooth surface, no fold, for sensitive fabrics; made from the belt with an inserted PEEK spiral.

RIGID BELTS

  • Kevlar® Sandwich joint with PEEK spiral
  • Bullnose 100% Kevlar®Joint
  • Aligator Metal Joint

RIGID

Teflon® (PTFE) Coated Fiberglass

TAMIP GT 40

Standard smooth quality, 4x4 mm mesh

Max Working Temp: 260º C (500º F)

Air Flow/CFM: 1900

Abrasion Resistance: none

 
 

TAMIP GT 40 DW

Smooth quality 4x4 mm mesh reinforced by a double weft

Max Working Temp: 260º C (500º F)

Air Flow/CFM: 1700

Abrasion Resistance: None

 

       
 

TAMIP GT 20

Standard smooth quality with reinforced construction, 2x2 mm mesh

Max Working Temp: 260º C (500º F)

Air Flow/CFM: 1150

Abrasion Resistance: None

       

FLEXIBLE

100% Polyester

TAMIP C 928

Resistant quality

Max Working Temp: 150º C (300º F)

Air Flow/CFM: 1400

Abrasion Resistance: Strong

       
 

TAMIP CA 928

Non marking needlepunched fiber surface

Max Working Temp: 150º C (300º F)

Air Flow/CFM: 280

Abrasion Resistance: None

       
  TAMIP C 498

Reinforced double layer belt for wide width shrinkage fabrics

Max Working Temp: 150º C (300º F)

Air Flow/CFM: 1300

Abrasion Resistance: Strong

       
  TAMIP Multiclip 80

Reinforced spiral belt, stable

Max Working Temp: 150º C (300º F)

Air Flow/CFM: 1100

Abrasion Resistance: Strong

       
  TAMIP C 4/4

Flat, strong and open conveyor belt 

Max Working Temp: 150º C (300º F)

Air Flow/CFM: 1250

Abrasion Resistance: Strong

       

FLEXIBLE

Ryton® (PPS) and Nomex® (Aramid)

TAMIP C 928 R

Sturdy enough for gas or heated oil dryers

Max Working Temp: 180º C (350º F)

Air Flow/CFM: 1570

Abrasion Resistance: Strong

       
 

TAMPI CA 928 R

Non marking needlepunched fiber surface

Max Working Temp: 180º C (350º F)

Air Flow/CFM: 450

Abrasion Resistance: None

       
  TAMIP C 928 RR

Sturdy enough for gas or heated oil dryers.

Max Working Temp: 200º C (390º F)

Air Flow/CFM: 1500

Abrasion Resistance: Strong

       
  TAMIP HT 500 NR

Suitable for pigment printing for good resistance at the joint and stability across the belt width.

Max Working Temp: 200º C (390º F)

Air Flow/CFM: 1200

Abrasion Resistance: Medium

       

FLEXIBLE

100% Nomex®

TAMIP HT 500 N

Resistant quality.

Max Working Temp: 230º C (450º F)

Air Flow/CFM: 920

Abrasion Resistance: Medium

       
  TAMIP HT 541 N

Smooth surface for sensitive print fabrics like silk, etc.

Max Working Temp: 230º C (450º F)

Air Flow/CFM: 615

Abrasion Resistance: Medium

       

FLEXIBLE

PEEK and Nomex®

TAMIP C 928 ZN

Reinforced strength for pigment printing.

Max Working Temp: 230º C (450º F)

Air Flow/CFM: 1200

Abrasion Resistance: Very Strong

       
  TAMIP C 944 ZN

Reinforced tight mesh for pigment printing.

Max Working Temp: 230º C (450º F)

Air Flow/CFM: 1000

Abrasion Resistance: Very Strong

       

Specifications


Features

Product Uses, Tasks & Application

Manufacturer Information